Welcome to the Telex® Audiocom® support section. This section of the website is designed to help end users troubleshoot their own systems quickly and effectively. All of the content in this support section is authored and maintained by Telex® Audiocom® technicians with extensive field experience. If you are a first-time user, Telex® Audiocom® recommends reading through the FAQ and Knowledgebase sections to familiarize yourself with system design and operation. If you still have questions, contact your nearest Telex® Audiocom® technical support specialist.

 Featured FAQ

How can I double the power on a Telex® Audiocom® channel while preserving the line audio level (AC Impedance) constant?

*If the user expanded the use of one channel beyond the DC capability of its power supply, the following is one method of how to double the DC power on a single channel while preserving the audio level and quality on that channel:
Use the PS-2001L as follows:
1. Disconnect the power source to the desired channel
2. Connect half of the system to the PS-2001L power supply CH#1
3. Connect the other half of the system to the PS-2001L power supply CH#2
4. Turn the operation switch (COMBINE/ISOLATE) on each power supply to the COMBINE position to route the audio from CH#1 to CH#2
The above application will provide the user with 2 amps of power (1 amp on each channel) while the audio is combined to allow both power supply channels 1 & 2 to operate as a single-channel intercom.
More Frequently Asked Questions

 Featured Glossary Term

Characteristic Sound Pressure Level

The Characteristic Sound Pressure Level of a headphone is the sound pressure level that an electrical output of 1 milliwatt generates.
More Glossary Terms